Square Corten Water Table

Crafted from 2mm thick Corten steel, each table develops a rich, natural patina over time, blending beautifully into both contemporary and rustic landscapes. The design features a closed water circuit, minimising maintenance and helping to prevent blockages. Water rises gently to around 50mm above the surface before cascading evenly over the edges, creating a smooth reflective finish. Integrated LED lighting adds a subtle glow, transforming the feature after dark and enhancing the play of light and water.

Please note: This product produces a gentle level of sound — from the cascading and bubbling water, as well as the running pump, which may be audible in certain environments.

Installation Requirements:
A flat, level surface is essential, ideally sand or gravel to assist with levelling. The table can be placed above ground or sunk into the soil. If installed flush, ensure a soakaway is provided beneath the unit to allow the overflow to function properly.

Lighting:
Fitted with OASE LunaLEDs producing a 6000k cool (daylight) tone for a crisp, clean effect.

Power Supply:
Two cables (one for the pump, one for the LED driver) exit via the overflow pipe beneath the table. Each is approximately 8m long. You will need either a weatherproof dual socket with safety cut-off or may choose to have the power cables hard-wired into an RCD-protected box — consult a qualified electrician for safe and compliant installation.

Power Requirements:

• LED Driver Unit: 230V / 50Hz, 2W (12V DC output)

• Single Spout Pump: 230V / 50Hz, 45W

• Multi Spout Pump: 230V / 50Hz, 400W